AG2000 Electro Magmeter Internal Data Logger, Control Console, Water Management, Farm GPS Units, farm products in new zealand

View all products from Watermetrics NZ Ltd

WHERE ARE YOU? ALL PRODUCTS > Farm GPS Units > Water Management > Control Console

AG2000 Electro Magmeter Internal Data Logger

Some of our other popular products:

AG2000 Electro Magmeter Data Logger

Keywords: Farm, Farm GPS Units, Water Management, Control Console

To enquire about this product and get pricing details contact Watermetrics NZ Ltd and mention Bits4Farms:

Phone: Show telephone 0800 493 7626

Email: Click here to email Watermetrics NZ Ltd

For use in irrigation, chemigation, agricultural automation, well usage monitoring, Dairy lagoons
4, 6, 8, and 10" pipe sizes
Simple as a mechanical meter
No moving parts
Built-in pulse output
Minimal straight pipe
Battery or external power
Solar compatible
Data logger compatible
Telemetry-ready

The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 meters to be used in piping configurations where there is little space between the meter and an elbow.

In chemigation applications, the meter should be installed upstream of the chemical injection point or enough downstream to allow thorough mixing of fluids ahead of the meter (see Tech Bulletin on Seametrics website Downloads page).

The standard AG2000 is battery powered. Where an external power source is available, the AG2000 can be optionally converted to 7-26 Vdc, with the batteries then serving to maintain continuous operation in case of power failure. This configuration will prolong battery life indefinitely.

The meter comes with built-in pulse output (requires optional output cabling) for data logging or telemetry. Several pulse rates are available. An internal data logger is also available for secure flow logging (-127). A Seametrics FT420W indicator can be added if remote rate/total reading is desired, or an AO55W if a 4-20 mA (analog) signal is required.

The AG2000 has a seal wire to protect against unauthorized access. The seal can be broken to change units of measure, replace the battery pack, or to field-install a power/output cable. The optional cable can be factory- or field-installed for applications where external power is available and/or pulse output is needed. The accessory weather guard is recommended in outdoor applications.

Stock code: WM100L, WM150L, WM200L

Links and Downloads

Instructions [728.48 kb]
Specification Sheet [961.88 kb]

To: Watermetrics NZ Ltd (

Show telephone 0800 493 7626 )

Hi, I'm from and I'd like some more info on your AG2000 Electro Magmeter Internal Data Logger. Any more details you have about this product and your pricing would be great. Please either phone me back on or email me at .

I also have the following questions:
Thank you.

I would like to receive the Bits4Farms newsletter

This product can not be shipped to the following regions:

Auckland	Bay of Plenty	Gisborne
Hawkes Bay	Manawatu/Wanganui	Northland
Taranaki	Waikato	Wellington

Bits4farms Mail

Bits4Farms specials are only promoted through Bits4Farms Mail.

Busck Stock Troughs

1435 3M Head Band Earmuff

Orion Adjust™Growth...

FALCONERO MULCHER...

Web development by Synapse